Keen Spa pH Increaser 1Kg

Keen Spa pH Increaser is designed to address low pH levels, particularly when they fall below 7.2. Spa water with acidity can lead to discomfort during bathing and, if left unattended, may contribute to the corrosion of metal components and fittings.
 
Spa Instructions:
 
Check the pH using test strips or tablets and increase it if the reading is below 7.2.
The recommended dosage is 10g of pH Increaser per 1,000 liters (220 gallons) of spa water, with each dose raising the pH by approximately 0.2.
With the circulation system in operation, administer the product directly in various areas around the spa, avoiding the skimmer. Apply the dose only after bathing has ceased.
Continue filtration and retest after 15 minutes.
Repeat the treatment as needed until the pH falls within the range of 7.2 - 7.6.
Pool Instructions:
 
Pre-dissolve the product in a clean plastic container, using a maximum rate of 100g per 2.2 gallons (10lts) of clean warm water.
Stir thoroughly to ensure complete dissolution of the product.
Add the resulting solution to the pool while the pump(s) are turned "on," preferably near the water inlets to facilitate even distribution.
After a minimum of 8 hours, recheck the pH level, and if necessary, repeat the treatment until the desired pH is established